How to read the S.M.A.R.T status ?

[wstam]

I am using 3x2T Western Digital Green drive and running in the RAID 5 mode. The Javelin is running v1 firmware.

My Disk 2 have error ("Task b0 timeout on disk 2 at LBA 0x0c24f00 (Length 0x0)") and the Javelin unmount the drive automatically. I unplug and plug the drive and the Javelin rebulid the RAID automatically. The drive seem working now but I want to read the S.M.A.R.T status to determine how bad the drive now.

The Administration Web interface only show the S.M.A.R.T is enabled but do not display any S.M.A.R.T status.

How could I read the S.M.A.R.T status?

[Patriot_Ben]

Hello,

(off the top of my head) Try an IP Ping into your Javelin's Admin tool through WEBpasm. There should be a drive health option. Under system, there should be drive health, there should be a system log too to see what exactly went wrong.