Got PBO with playon firmware, trying to revert to Official
Hi. I recently recieved my 2nd pbo, but it has the AC Ryan Playon firmware
and i'd like to switch it back to the last official non-beta firmware.
Can anybody tell me how to check the bootcode and if i should
expect any prolbems with just doing a firmware update on it?
Can you tell me where this unit was purchased from? The best course of action maybe to return it to the reseller for a unit with an official firmware on it.
This was an ebay purchase, sadly its the only place left to purchase one that I've found
Originally Posted by Patriot_Ben
Some ACRyan firmwares can pose problems when you try to change them. I would strongly recommend making a serial cable as posted here: http://www.patriotmemory.com/forums/...er-666-Seconds.
Changes to firmware via the serial cable are virtually foolproof.
Thank you Patriot_Ben and jamaroney for answering
I decided to temp fate and install B18-61R3 and it worked beautifully! Of course, not knowing when to quit
I tried installing some of the other firmware (earlier releases) and eventually went back to 61R3
A quick question: My original PBO lists the firmware as P020BC18-61 and the firmware from above (The
only one ive seen so far in the 61 revision) lists it as P020BC18-61R3. I hate to be a pain, but since this is a backup
for my main pbo (which, sadly, i may have to RMA due to usb dropouts, but thats another story) I
was wondering where i could find the BC18-61 (non r3) firmware. I'm guessing its the non-beta...
Again, thank you all for your reply's
Have you checked here? Here's where you can all of the official Core firmware downloads: