pg234g1600elka problem running at 1600mhz

[Sneaky-hedgehog]

hey guys i have a fx 4100 and a 990xa ud3 motherboard with this ram pd000237-pg234g1600elka. it says it will run at 1600mhz but it will blue screen after an half hour or so. i set the timings to 9-9-9-24 and the voltage to 1.65 and it will crash. My bios has also been updated to the latest version. i have also tried putting to 160ns and still no stability. any help would be appreciated. i also have not changed the northbridge or hsb but i wouldn't think that would be a factor for 1600 mhz.

[Patriot_Ben]

Hello,

Can you try increasing the trfc to 300ns? You may need to increase the cpu and NB voltage to 1.30-1.35v. Can you also try increasing dram voltage to 1.70-1.75v? AMD's memory controller can generally be tougher on memory.