Results 1 to 5 of 5

Thread: No video after uppdated firmware to version P06 or higher

  1. #1
    Join Date
    Jun 2012
    Posts
    6

    Unhappy No video after uppdated firmware to version P06 or higher

    After updating the firmware to P06 the home page has switched to PBO Core which means update is successful. However no video only sound plays on my files the screen was black and turned back to the home page after 1 minute. My box is originally installed with Boot Code : 0202.0018 with system revision : P020P02. I have no other choice and downgraded it to version P05 which works. Everything works perfectly. Kindly advise what's wrong with the update, or I missed any in the set up procedure?

    Thanks in advance for your advise.

  2. #2
    Join Date
    Dec 2009
    Location
    Canada (ON)
    Posts
    2,040

    Default

    Quote Originally Posted by Danny616 View Post
    After updating the firmware to P06 the home page has switched to PBO Core which means update is successful. However no video only sound plays on my files the screen was black and turned back to the home page after 1 minute. My box is originally installed with Boot Code : 0202.0018 with system revision : P020P02. I have no other choice and downgraded it to version P05 which works. Everything works perfectly. Kindly advise what's wrong with the update, or I missed any in the set up procedure?

    Thanks in advance for your advise.
    I recommend that you try P70R2 and see if that works for you. Although labeled as beta it is by far the most stable firmware.

    Cheers!!!

  3. #3
    Join Date
    Jun 2012
    Posts
    6

    Default

    I've tried P70R2 but still no video like p61. Any further advise?

  4. #4
    Join Date
    Dec 2009
    Location
    Canada (ON)
    Posts
    2,040

    Default

    Quote Originally Posted by Danny616 View Post
    I've tried P70R2 but still no video like p61. Any further advise?
    Hmmm!!! Something does not get erase during the firmware update. Since you probably do not have a TLL Serial cable I can recommend that you try to flash P02 since it has been known to reset and delete a lot of left over stuff from previous firmware and then flash P70R2 and see if P70R2 now work correctly.

    By the way aren't any video available (HDMI or RCA video connector) ????

    Please do not hesitate to post again if what I suggested still does not work for you.

    Good luck !!!

  5. #5
    Join Date
    Jun 2012
    Posts
    6

    Default Update P70R2

    Yes, I did try RCA and HDMI but got no video, only audio. I'll try to reset P02 and update the P70R2 . Will keep post the outcome in due course. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •