Page 4 of 4 FirstFirst ... 234
Results 31 to 37 of 37

Thread: ASUS HD2 With MOS For PBO

  1. #31
    Join Date
    Nov 2010
    Location
    Ukraine, Kiev
    Posts
    32

    Default xupnpd mos3 module - eXtensible UPnP agent

    Original xupnpd page- here.
    This program is a light DLNA Media Server which provides ContentDirectory:1 service for sharing IPTV unicast streams over local area network (with udpxy for multicast to HTTP unicast conversion).
    The program shares UTF8-encoded M3U playlists with links over local area network as content of the directory.
    You can watch HDTV broadcasts (multicast or unicast) and listen Internet Radio in IP network without transcoding and PC.
    Status- beta testing.
    Module use original xupnpd-rc6. If pshare mos3 module is installed, stop or disable it.
    Install:
    Code:
    pm install xupnpd alone
    Copy the CODE and paste, Enter in telnet-session to PBO or mos3 web-interface-Navigation-Fake Shell (Fake Shell 1.0.5.2 mos3 module must be installed).
    Access- Point your Internet browser to 'http://192.168.x.x:4044' (192.168.x.x - replace with your PBO address) or go to mos3 web-interface-Navigation-xupnpd web interface.
    Use- Upload your IPTV playlist (m3u file format), Enjoy IPTV.

    If You want to update to the last xupnpd revision- download file xupnpd-rc9.tar.gz from xupnpd page and manually replace the contents of the folder /usr/local/etc/mos/xupnpd on the content of the archive.
    Note! To work with udp и rtp protocols - udpxy must be installed. (use UDP-to-HTTP mos3 module in PBO or , if udpxy is installed on your router, add to /usr/local/etc/mos/xupnpd/xupnpd.lua its address in the line
    Code:
    -- external 'udpxy' url for multicast playlists (udp://@...)
    cfg.udpxy_url='http://127.0.0.1:8080'
    .
    Last edited by bizonUa; 09-25-2012 at 07:45 PM.
    http://pborus.hostzi.com/English/ - English Page of Russian non-oficial PBO support

  2. #32
    Join Date
    Nov 2010
    Location
    Ukraine, Kiev
    Posts
    32

    Default Skin IconBit hds42l 120923 for AMP8


    Available new skin- IconBit hds42l 120923.
    Module Skin Selector must be installed, its settings-Download skin and FW into plugged drive, validation and them unpack to memory.
    Install- 1. Resources-Skin Selector- IconBit - Install.
    2. Skin Selector- IconBit - Select.
    3. for Remote Control work- replace /usr/local/etc/mos/irfake/irfake.conf on the content of the archive rar.
    Last edited by bizonUa; 10-15-2012 at 08:44 AM.
    http://pborus.hostzi.com/English/ - English Page of Russian non-oficial PBO support

  3. #33
    Join Date
    Dec 2012
    Posts
    1

    Default

    How do I re-flash different firmware after install O!Play. I couldn't able to do it through firmware update.

  4. #34
    Join Date
    Nov 2010
    Location
    Ukraine, Kiev
    Posts
    32

    Default

    Quote Originally Posted by AstronusX View Post
    How do I re-flash different firmware after install O!Play. I couldn't able to do it through firmware update.
    Please, add a couple of words about the "install O!Play" - what specifically used the firmware?
    AMP-firmware supports all the available methods of flashing - in the menu, SW3, Soft-reset and serial cable.
    http://pborus.hostzi.com/English/ - English Page of Russian non-oficial PBO support

  5. #35
    Join Date
    Nov 2010
    Location
    Ukraine, Kiev
    Posts
    32

    Default

    mos3 update (base+core,some modules) available.
    Update - base r16, core r37, 'sskin r10, parole r3, youtube r8.
    Through the mos3 web-interface or by Remote - update repository, then modules.
    http://pborus.hostzi.com/English/ - English Page of Russian non-oficial PBO support

  6. #36
    Join Date
    Nov 2010
    Location
    Ukraine, Kiev
    Posts
    32

    Default

    New Firmware from Farvoice - amp12
    Available skins and install - http://pborus.hostzi.com/amp12_en/
    Available mos modules - http://pborus.hostzi.com/mos-modules/
    http://pborus.hostzi.com/English/ - English Page of Russian non-oficial PBO support

  7. #37
    Join Date
    Mar 2015
    Posts
    2

    Default

    Hi! Hope this is the right place to ask.

    I just installed AMPr12 for PBO (Patriot Box Office) in my Realtek 1073 based player (an Argosy HV335T). I choose the HD2 Blue skin. It looks really great!

    But have some issues with it, don't know if it's a problem with my player or I have miss any configuration

    1) I can't get good analog audio output (hdmi works ok when testing in other TVs). I read something about checking a "/usr/local/sbin/03 72 1" command, in the etc/rc files. Looking at them I manage to run this command "gpio 72 0" through telnet. After that, and raising the TV volume to the highest, i manage to get a very very very low sound. Is there any way to make analog output work (as hdmi)?

    2) When the player start and the menu is shown, the wifi connection doesn't seem to autostart. I need to go to Setup-Network-Wirless Setup and choose the already configured connection to start it.

    3) In my old analog tv, the default font looks small and not clear enough. Is there any way to change it (the font or the size)?

    4) Last one, the argosy HV335T default power cycle has 3 states. Power Off-Standby-Power On. With this PBO firmware (and with others I tired in the past too), when you try to put it in Standby (from Power On), the player doesn't seem to enter in this standby mode properly, cause the HDD continue spinning and the front led light continues flashing/blink. And you can't power on again from this "pseudo" standby. The only way to power on again is shutting down completety (from AC Power or the front button), and then pressing the front button again to put it in Standby mode. After that you can put it again in power on with the remote.
    I don't think there is a solution for this one, but dont' lose anything asking

    Thanks in advance!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •