rf128gs25ssdr not detected

[drWolf]

Hello, I am the owner of ssd patriot 128gb rf128gs25ssdr, ordered it from ebay,
The problem is that it is not detected, probably due because the old system board and read what happens. Set the jumper is defined as Yatapdong barefoot-rom. I am looking for the firmware which will fix this mess, the current version 00.P80.

PS128GS25SSDR wanted to know the same thing ?

[Patriot_MA]

Hi Dr.Wolf,

You put the jumper on the drive and it read as Yatapdong barefoot? Sounds like you have a Torqx drive.

Try this to revive the drive.

Add the jumper to the drive and see if the SSD comes up in the BIOS as YATAPDONG BAREFOOT.

If it does, then you can reprogram the FW.

Download version 2030 and follow the FW update instructions.
http://patriotmemory.com/support/driversp.jsp

Be sure to download the instructions on how to update the FW.
http://www.patriotmemory.com/softwar...mware_2030.pdf

Also what are the specs of your system?

[drWolf]

Thank you so much, I downloaded the firmware upgraded and got a full working capacity.
That's what was under the label

PFZ128GS25SSD-6E24B0936
S2SF-A28SMDCDX1-12E, TW98210003

Patriot Torqx 128Gb SSD