Results 1 to 3 of 3

Thread: rf128gs25ssdr not detected

  1. #1
    Join Date
    Apr 2012
    Location
    Voronezh
    Posts
    2

    Angry rf128gs25ssdr not detected

    Hello, I am the owner of ssd patriot 128gb rf128gs25ssdr, ordered it from ebay,
    The problem is that it is not detected, probably due because the old system board and read what happens. Set the jumper is defined as Yatapdong barefoot-rom. I am looking for the firmware which will fix this mess, the current version 00.P80.

    PS128GS25SSDR wanted to know the same thing ?

  2. #2
    Join Date
    Apr 2011
    Location
    Fremont CA
    Posts
    78

    Default

    Hi Dr.Wolf,

    You put the jumper on the drive and it read as Yatapdong barefoot? Sounds like you have a Torqx drive.

    Try this to revive the drive.

    Add the jumper to the drive and see if the SSD comes up in the BIOS as YATAPDONG BAREFOOT.

    If it does, then you can reprogram the FW.

    Download version 2030 and follow the FW update instructions.
    http://patriotmemory.com/support/driversp.jsp

    Be sure to download the instructions on how to update the FW.
    http://www.patriotmemory.com/softwar...mware_2030.pdf

    Also what are the specs of your system?

  3. #3
    Join Date
    Apr 2012
    Location
    Voronezh
    Posts
    2

    Cool

    Thank you so much, I downloaded the firmware upgraded and got a full working capacity.
    That's what was under the label

    PFZ128GS25SSD-6E24B0936
    S2SF-A28SMDCDX1-12E, TW98210003

    Patriot Torqx 128Gb SSD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •