Results 1 to 2 of 2

Thread: Pyro 60GB SATA III 2.5 problem with OS installation on MacBook 13' early 2008

  1. #1
    Join Date
    Apr 2012
    Location
    Cracow, Poland
    Posts
    1

    Unhappy Pyro 60GB SATA III 2.5 problem with OS installation on MacBook 13' early 2008

    Hi,

    i used the SSD as the main drive on my MacBook with OS X Lion. Yesterday when I wanted to turn on my Mac. I saw only a "kernel panic". I said to myself, ok I need to reinstall OS. But it is't easy. When I wanted to start installation of the system, again I saw the gray box with a "kernel panic". Only after removing the disk from a Mac and format it on the PC. I was able to start proces of the installation. However, when the system starts to install on SSD I see agin "kernel panic"!

    What can I do? Help ...

  2. #2
    Join Date
    Jul 2008
    Posts
    3,574

    Default

    Hello,

    Does the Mac only get these Kernal Panics with the 60GB Pyro SSD? A number of things can attribute to the kernal panics... such as faulty ram.

    What firmware are you on?

    Can you try flashing it to 5.0.1?
    Here’s the link for 5.0.1:
    http://patriotmemory.com/software/py...SE%205_0_1.zip

    You'll also need to download the updater tool as well:
    http://patriotmemory.com/support/driversp.jsp

    Please advise, and advise the firmware helps.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •