I've been having the same issues
I've been having the exact same issues, computer slowing down to a crawl (usually followed by a bluescreen)
I updated the firmware last night.
However, this morning I woke up to a bluescreen with only two lines on it
"STOP: C0000135 The program can't start because %hs is missing from your computer. Try reinstalling the program to fix this problem."
I also received a STOP F4 code only 30mins ago, when I plugged in an external hdd.
Ok at this time I would like to get your drive sent to us to be diagnosed and determine if your drive is defective. I will PM with more information.
Originally Posted by Johnyeoh
So I just need to buy a small postage box and mail it?
Originally Posted by Patriot_VL
What should I write on the "Recipient" label?
How long will it take? (sigh... T_T have to redo my OS to another drive again...)
Please refer to your PM, all the info is in there and our RMA dept will work with you.
Originally Posted by Johnyeoh
Does Patriot acknowledge the BSOD issue with 3.2.0 Wildfire? Is there a fix coming? What is your recommended solution?
Right now we had one system running 240GB Wildfire 3.2.0 FW that locked up. We are diagnosing that drive to find out what has happened. The other systems are still testing with no issues.
Purchased my 120G Wildfire on 7/23. It had been great until last week without any FW updates. It started freezing and would not resume even after 30min of waiting. In the last 3 days, it has frozen once per day. When it froze today, the drive disappeared from the BIOS after resetting.
I was able to add the drive back into the BIOS but now I'm starting to get worried. It may be developing more severe issues similar to those experienced by other Sata 3 Sandforce chipset users. Should I update the Firmware to Rev 3.2.0?
This platform has been stable for 2yrs with Raptor and Velociraptor mechanical drives. The Highpoint controller was working fine on this platform with my Plextor PX-128 (non Sandforce) SSD for over a month.
Quad Core 9660
Highpoint 620 Sata III Controller
Wildfire 120GB SSD (AHCI)
Last edited by cjoe; 08-23-2011 at 09:25 AM.
My last post was about 4 days ago and now it is about 1 week that I have updated my wildfire 120GB with 3.2.0 firmware. My system is about 10 to 12 hours a day, up and yet I do not have any problem after update.
As a refrence I should say that I have an ASUS Crosshair IV Formula mainboard based on AMD 890FX chipset and AMD 850 southbridge. I use my SSD on a SATA III port with its special cable and in the AHCI mode. My CPU is a Phenom II X6 1075T. After I have updated the SSD's firmware , although windows was running on that, I made a clean install of windows 7 Enterprise X64 with all the new drivers that I had downloaded.
I have also a Windows 2008 enterprise on my system which I use for my personal lab(It is installed on the same drive that I use for Windows 7 but on another partition) and it works very well the same as my windows 7.
Also, because I have 16GB of Patriot 2000Ghz Viper DDR III memory installed on my system, I have disabled the virtual memry for both of my windows.
So far my system works without a heck.
I do not know what would be the problem for some other friends in this forum, but I suggest they also use a fresh install of windows and the latest drivers of their hardwares.
In the same way, it would be of help if you search about the possible defects and bugs in your mainboards chips and any incompatibility that they may cause , as you may remember the defects in some previous Intel chipsets such as P65's model.
I really hope all of your problems solve as soon as possible.
And this is the result of my ATTO test.
Last edited by aminel1358; 08-23-2011 at 11:30 AM.
Reason: adding some information
I updat my firmware wildifre, i make a new fresh win 7 install whit all drivers, 2-3 day whitout problem, and after that, bsode blue screen freeze reboot com back again. I have another SSD installed on my computer (not sandforce 2XXX) and he run correctly. Then, i think the sandforce 2XXX controller is the problem today. Many other SSD whit sandforce 2XXX controller (OCZ, Corsair..) Have this issue. We can only hope to get a good firmware.
Originally Posted by aminel1358
Last edited by Mseirco; 08-23-2011 at 01:52 PM.
We recommend updating the drives firmware to 3.2.0
Originally Posted by cjoe