04-02-2013, 01:56 PM
Yes semi-official P70R2(BCN) --> Boot Code Neutral will work fine with bootcode 16; there are no requirement to first flash P02. P02 is simply a firmware that seems to clean up a lot of things in the PBO so it is used sometimes to give the PBO a good reset and clear up some of the weird problems that can not be explained. Therefore flashing P02 is only needed if you experience any weird problems/behaviour from the PBO; it can be used at anytime to resolve those weird issues.
Originally Posted by Sam Ontario
PS: Make sure that you let the flash process completely finish before you remove your USB stick containing the firmware image. The PBO might have to reboot a couple of time before the flash is complete. Once it finally return you to the setup menu the flash is complete and you are good to go.
Last edited by snappy46; 04-02-2013 at 01:59 PM.
04-03-2013, 02:50 PM
Thanks very much for the confirmation and the info about the P02. After I flashed the P70R2(BCN), connected a USB DVD ROM drive, inserted a DVD movie and the movie autoplayed. The remote control works well with the PBO and the DVD ROM drive. Very nice! Thanks all those who made this possible.