Results 1 to 3 of 3

Thread: Patriot PC25S Convoy 3.5" Internal Enclosure

  1. 03-13-2011, 04:22 PM #1
    bbq4tw
    bbq4tw is offline Junior Member
    Join Date
    Mar 2011
    Posts
    2

    Default Patriot PC25S Convoy 3.5" Internal Enclosure

    Does the PC25S Convoy natively support SATA revision 3 (SATA 6 Gb/s)? I have a SATA revision 3 ssd and am looking for a cool way to mount it and saw your device. I'm sure the drive will work in your device but need to know if it will run at the full 6 Gb/s or will it downgrade it to revision 2 (SATA 3 Gb/s)? Thanks.
    Reply With Quote Reply With Quote
  2. 03-13-2011, 08:19 PM #2
    BadIntentions
    BadIntentions is offline Super Moderator
    Join Date
    May 2010
    Location
    In the land of make believe.
    Posts
    505

    Default

    It MIGHT work, but there is a decent chance it wouldn't. SATA 6Gb/s has much more strict requirements for crosstalk and cable standards. The PC25 was already pretty marginal at SATA 3Gb/s.
    I AM NOT A PATRIOT MEMORY EMPLOYEE.

    But they have, on occasion, bribed me with hardware.



    I am happy to help, but don't PM me. Post a thread in the appropriate forum so others may benefit and offer assistance.
    Your lack of planning is not an emergency on my part.
    Reply With Quote Reply With Quote
  3. 03-14-2011, 03:00 AM #3
    bbq4tw
    bbq4tw is offline Junior Member
    Join Date
    Mar 2011
    Posts
    2

    Default

    Quote Originally Posted by BadIntentions View Post
    It MIGHT work, but there is a decent chance it wouldn't. SATA 6Gb/s has much more strict requirements for crosstalk and cable standards. The PC25 was already pretty marginal at SATA 3Gb/s.
    Thanks for the reply and thanks for the info.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules