Results 1 to 6 of 6

Thread: New Patriot Valkyrie NAS Replacing Corza NAS

Hybrid View

  1. 03-07-2011, 04:28 PM #1
    dsnel23
    dsnel23 is offline Junior Member
    Join Date
    Aug 2010
    Posts
    7

    Default New Patriot Valkyrie NAS Replacing Corza NAS

    So I had a Corza NAS that went bad and they shipped me a Valkyrie. I had the Corza setup in Raid 1, with 2 - 1 GB Samsung drives. Everything was working fine in the Corza but it would stop responding once a day or so and I would have to power it down and restart it.

    So now i put the 2 drives into the Valkyrie and it only recognizes drive A. Even if i flip the 2 drives it still only recognizes drive A. Drive B the "Link / Error" LED continues to flash red. I've looked inside the web login and it only finds HDD A both times. Is it rebuilding? or is there something I need to do? I have all the data backed up externally and guess I could reformat both drives but that would just be a huge pain... and would it even see both drives then? and that defeats the whole point of Raid 1.

    Any help would be great! thanks!

    David
    Reply With Quote Reply With Quote
  2. 03-08-2011, 02:51 PM #2
    BadIntentions
    BadIntentions is offline Super Moderator
    Join Date
    May 2010
    Location
    In the land of make believe.
    Posts
    505

    Default

    If the system doesn't recognize the drive, something might be electrically wrong with it. Check under drive tools to see if its showing up...

    I've posted this before, but its unlikely the Valkyrie will recognize the Corza partitioned drives. The Valkyrie is pretty inflexible about how it handles drive partitioning, since it uses the HDD to store configuration information.
    I AM NOT A PATRIOT MEMORY EMPLOYEE.

    But they have, on occasion, bribed me with hardware.



    I am happy to help, but don't PM me. Post a thread in the appropriate forum so others may benefit and offer assistance.
    Your lack of planning is not an emergency on my part.
    Reply With Quote Reply With Quote
  3. 03-09-2011, 02:24 AM #3
    dsnel23
    dsnel23 is offline Junior Member
    Join Date
    Aug 2010
    Posts
    7

    Default

    Ok so i formatted both Hard Drives to ext2 via the NAS but had to do them one at a time in the HDD A slot.

    Then in the NAS web page under disk management and disk settings with both drives inserted I can only see HDD A never HDD B. Even when I flip the drives I still only see HDD A. I also put a file on both drives in the public folder to be sure I'm seeing different drives.

    So what is wrong with my HDD B slot? All it ever does it flash red. And when I pull out the drives they are extremely hot, is this normal?
    Reply With Quote Reply With Quote
  4. 03-09-2011, 06:03 AM #4
    BadIntentions
    BadIntentions is offline Super Moderator
    Join Date
    May 2010
    Location
    In the land of make believe.
    Posts
    505

    Default

    Try only a single drive in slot B, with A empty. If it doesn't show up, switch the drives. If it still doesn't show up, then something may be wrong with the NAS.
    I AM NOT A PATRIOT MEMORY EMPLOYEE.

    But they have, on occasion, bribed me with hardware.



    I am happy to help, but don't PM me. Post a thread in the appropriate forum so others may benefit and offer assistance.
    Your lack of planning is not an emergency on my part.
    Reply With Quote Reply With Quote
  5. 03-10-2011, 01:23 AM #5
    dsnel23
    dsnel23 is offline Junior Member
    Join Date
    Aug 2010
    Posts
    7

    Default

    Well tried that too and still nothing. I just emailed help support hopefully they can get me a replacement. Thanks for all your help BadIntentions!
    Reply With Quote Reply With Quote
  6. 03-24-2011, 05:14 PM #6
    lunghd
    lunghd is offline Junior Member
    Join Date
    Mar 2010
    Posts
    17

    Default

    So the Valkyrie is the replacement for the Corza... but you can't just swap in the Corza's drives and go?

    Does Patriot offer a NAS that will allow me to swap in my Corza drives & get back up and running?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules