Hi.

I have a big problem.
I have bootcode 16.
I installed the new beta firmware and it went fine.
Now the movies started to make small stops like the pbo couldnt show the movie fast enough. The only way to show a good pic was using 1080I 60fps.
Next thing the box wouldnt start with picture, it started with the 720*576 start picture, and then i made a stil pic with a pic that looks like at digital tv signal with poor signal. The only way now was using a composite cable and reset all settings, now the hdmi worked again, but only until a reboot, then the same again.
I used fac reset, and the setting now went to -7 on the adjustmet settings.
I rebooted and the screen show logo, and then black.

I have solded 2 wires on switch 3 on the mb, but i cannot make the machine go in stop mode with red ligt, it just start up with green.
I have used a memstick format fat 32 p02 trying to force a reinstall, but the usb light on pbo dosent light up, so that dosent work.
I can telnet into it using 192.168.0.9 but when i write kill -6 1 the connection is lost and nothing happens.

The pbo just restarts over and over, the logo is shown for 30-40 sec, then signal to tv is lost, few mins later it restarts and do the same.

I have power on my usb stick but pbo dosent take it.

I have now ordered the nokia serial usb cable to try and chance my bootcode, but i doubt it will help any.

Do you have any ideas what to do.
Thx.
Brian