The only thing I can think of is a corrupted firmware which means that you have to do the flash process all over again. If you still have no luck after that I would try the official firmware and see if problem persist. It would seem as if P70R2 megapack as been known to cause some weird problems with the PBO. Therefore unless you definitely need the functionality provided by the megapack I suggest that you try P70R2 (BCN) and just install what you really need manually instead of using the megapack.
Also if you have a serial cable available I would try to get into the YAM Monitor and erase the memory with erase -m; this is better than installing the P02 firmware to clean things up.
Good luck.



Reply With Quote
