Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Great, just got a PC-100 from a buddy and now i read the reviews...

  1. #1

    Default Great, just got a PC-100 from a buddy and now i read the reviews...

    i poop this thing in and format it, and i want to upgrade the firmware before i install windows 7 on the drive. flash program says it cant find a device......

    went through the Bios on a Nvidia 680i and cant find anything bout ACHP or whatever its calledd.... please help..

  2. #2
    Join Date
    Jul 2008
    Posts
    3,503

    Default

    Hello,

    Does the drive show up in your bios?

    You are plugging in the PS-100 drive as a secondary drive with another master HDD and O/S correct?

  3. #3

    Default

    Yes i have a WD Raptor that was getting pretty full, i would like to use that Raptor as storage and use the PS-100 for windows 7 64 bit

    and the drive does show up in bios

  4. #4
    Join Date
    Jul 2008
    Posts
    3,503

    Default

    Can you still see the PS-100 drive in the bios?

    If so, try right-clicking on the firmware program and select 'run as administrator.'

  5. #5

    Default

    yea ive tried that a couple times and still says i cant detect...

  6. #6
    Join Date
    Jul 2008
    Posts
    3,503

    Default Please confirm...

    So the drive does not show up in the bios?

  7. #7

    Default

    im sorry you are correct the drive doesnt show up in bios...

    went back to check after i told u it did and it wasnt there.
    Last edited by Chronic.Cough; 09-20-2010 at 09:53 PM.

  8. #8
    Join Date
    Jul 2008
    Posts
    3,503

    Default

    Sent you a PM with RMA instructions.

  9. #9

    Default

    well thank you for the RMA form, but i am able to see the drive in my computer and i ran that ATTO test on the drive and i got results from the test...

    do u still think the drive is bad?

  10. #10
    Join Date
    Jul 2008
    Posts
    3,503

    Default

    Quote Originally Posted by Chronic.Cough View Post
    well thank you for the RMA form, but i am able to see the drive in my computer and i ran that ATTO test on the drive and i got results from the test...

    do u still think the drive is bad?
    If you still need the firmware upgraded then yes you can send the drive in.

    Check with Crystal Disc Info to see which firmware you are on.

    If it's 3.004 or 3.005, then it is our newer firmwares.

    If you are sending the drive in for a firmware flash, please specify on the rma form.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •