PVT36G1600LLK with Prolimatech Megahalems?

[Fireman1ce]

Will PVT36G1600LLK fit in the first slot nearest the CPU, regardless of the direction the heat sink is turned?

I am purchasing a ASUS P6T Deluxe V2 motherboard with the i7 920, so I wanted to check with you. The Prolimatech Megahalems measures 40mm from the bottom of the heat sink to the lowest fin. However, the memory bank slots are higher than the CPU, so I don't know whether the modules will have the clearance. I have read at least one article at XBitLabs stating the Prolimatech Megahalems will block certain memory modules from using the first slot, if the modules have heat sink risers that are too high. The article uses the P6T Deluxe motherboard. Further, I am planning to use a single 120x25mm Yate Loon fan (push).

Thanks,

Fireman1ce