Search:

Hello,

The power button is an actual button and not a rocker. It sounds like the power button might be slightly misaligned. Can you try loosening the screws on the bottom plate to see if it gives...

Hello,

Unfortunately we do not have any firmware updates available for this drive. We would recommend a replacement. To replace the drive under warranty, please e-mail [support@patriotmem.com].

Hello,

Actually our PDC22G6400LLK is a 2GB kit consisting of 2 x 1GB modules. If they are reading as 1GB each, 2GB total, this is actually correct.

Sent you a pm.

Hello,

Can you make sure that you are not plugged in via USB when attempting to connect wirelessly?

What about the wi-fi indicator light? What kind of patterns?

What is the make and model of...

Hello,

Unfortunately it would not be possible to connect your Node to the router (as a fixed/mounted device). However what you can do is connect your Node to your wireless router and utilize the...

Hey lousk,

Besides capacity, feature and spec-wise everything would be identical to the Gauntlet 320.

Hello,

Going forward our Gauntlet Node will still be our DIY version without a Hard Drive. Our Aero is simply an extension of our Gauntlet 320, which includes a pre-formatted Hard Drive internally.

Hello,

I'm a little confused at what you're trying to do. Are you having trouble setting up the Gauntlet Node to your router as a wireless passthrough?

Can you make sure that you have the...

Hello,

Are you referring to the password? Once the password is changed give it a minute than turn the device Off and ON again to reset the cycle.

Hello,

Are you connected to it wirelessly?

-Make sure you have established a wireless connection.
-Click on the finder icon.
-Navigate to the upper taskbar and select "go"
-Click on "connect...

Hello,

Do you have the latest BIOS?

Try testing it one stick at time with Memtest86 to see if it's possibly defective.
Memtest can be found here: http://www.memtest.org/

Hello,

Can you verify that each kit works at the rated timings? Please keep in mind that the rated timings are tested per kit, we cannot guarantee that running (2) sets would work.

Otherwise...

Hello,

Please check your PM.

Hello,

At this point, everything from slots to programming seems to check out.

Have you tried contacting the motherboard manufacturer to see if they have any input?

Otherwise, the only thing...

Hello,

What kind of files are these?

Can you try plugging it via USB and doing a scan and check for errors?

Have you tried a hard reset? (small pin in the reset hole for 5 seconds)

Hello,

Under CPU-Z, can you let me know what it says for the SPD tab with any of the memory installed?

Let me know what it says under each slot.

For clarification, what is the Patriot Part Number of the memory you have? Ie; PVS34G1600LLK.

Hello,

Sent you a pm on the 18th...

Hello,

This is a strange issue.

Have you checked the CPU socket to make sure that their aren't any bent pins?

So each slot recognizes each stick ok?

Hello,

What iOS version are you running?

Sent you a pm.

Hello,

It doesn't sound like a faulty CF card since you verified that it works in a computer via card reader. However, what we can try doing is replacing the card to see if this alleviates the...

Have you verified that it works in another system with a different OS?

Make sure that you have the latest USB/Chipset Drivers installed.

Hello,

It's possible that this is simply what the boot programmed values are. Since they are programed to DDR-1066 (533MHz), this might be fixed, depending on where it states this.

Please...