It's definitely annoying, which is why I mention MedeBO, since Mede8or seems to care enough about their customers to have figured out how to fix the problem. I haven't had to switch my audio in...
Type: Posts; User: GuyllFyre
It's definitely annoying, which is why I mention MedeBO, since Mede8or seems to care enough about their customers to have figured out how to fix the problem. I haven't had to switch my audio in...
Click the "makeover" link in aasoror's sig, choose MedeBO, flash, enjoy not having to flip back and forth on SPDIF audio, a nicer interface, and better MKV support.
There's another thread where this is covered:
http://www.patriotmemory.com/forums/showthread.php?6053-Semi-interesting-Handbrake-issue&p=38487#top
There's one caveat. If you're using x64 Linux,...
Anyone come up with a solution for this?
I'm running MedeBO (Medi8or) on my PBO.
I've noticed some issues also. I can't "go back" to an older version of Handbrake as I run Ubuntu Studio x64. ...
No, this is COMPLETELY the fault of Microsoft and them implementing a broken form of SMB. They intentionally take a standard protocol and then "enhance" (read, break) it so that it makes it nearly...
Go get a NAS.
Problem solved.
All these problems with Windows. Well, Windows sucks.
Yes, this is the normal operating mode of Windows.
It's why all of my files are no longer on a Windows server but a FreeNAS home-built box and why all of my home computers now run Linux as the...
So far I'm liking the MedeBO firmware. The interface is nice.
What's really nice, the alphabetical sort works!
Flashed back to P61 Mega and have the same problem, no YouTube, no ShoutCast.
Didn't even telnet to it. Going back to MedeBO for now. It's captured my interest. I might even figure out how to...
I did the downgrade first, seems I was one of the unlucky ones.
I installed MedeBO last night and was playing with it, so I didn't get a chance to put P61 Mega back on and see if it worked.
If...
Before services enable and start are run, it produces an error that it can't cd to /tmp/www.
After running results in:
/tmp/www #
OK, after power cycle, again, the YouTube and ShoutCast functions don't work.
I run the enable and then start and when I run start the first time, I get the following:
~# Starting RSS Ex...
cp:...
Salvage any momentary from any discarded ATX computer case. Can't get cheaper than free.
Only works for the playing video, not the menus.
I've checked the file, those two lines are NOT missing.
Is vi my only editor choice? *Goes and looks for the vi help documents for *nix retards*
OK, first run gave an error about not being able to create /tmp/www/bin, cgi-bin, and img when running ./services start but a second run through both commands has it working.
Will this need to...
The flash went smoothly this morning, back to P02, then to P61 Beta Mega. YouTube and ShoutCast were working fine right after flashing the PBO.
Now after being power cycled, the YouTube video...
P61 Beta seems OK but does not auto-switch the audio.
Oh well.
Menus are larger than the TV.
Picture scales OK but the menus do not.
Check your NTFS permissions on that drive. Make sure the NAS user has access to it.
I didn't see the speed reports but I'll have to look into them and see if there's going to be a fix for them or if this is the fix, that the units are junk and won't do anything faster.
Even if...
While it's not specifically an Intel problem, so far I've only seen it happen with Intel wireless controllers.
Others have used TKIP and gotten N speeds...so while it's part of the N standard, it...
Just a quick note for those out there with Wireless N and compatible devices.
You may come across a quirk where you have Wireless N and the device refuses to connect above 54Gb. This can be...
Hardware C1. I had been having a LOT of problems with wireless speeds on the PBO at first and then was having these same problems on two other clients. Once the unit died, I thought I had found the...
I finally got my D-Link DIR-615 back from RMA and discovered that it was still unstable. I then found out that dd-wrt was now supported on that model. A few minutes later and I was up and running...