Search:

Type: Posts; User: Patriot_Ben

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds; generated 7 minute(s) ago.

  1. Hello, Our Viper 3 memory should generally...

    Hello,

    Our Viper 3 memory should generally work. However, since the memory is tested on Intel Platforms, the rated performance speeds may not work. You may need to relax the speeds to 1600MHz....
  2. Replies
    1
    Views
    169

    Are you trying to access it through a computer or...

    Are you trying to access it through a computer or through the camera?
    Is it able to access with the camera?
    Try also placing the card in the camera, and connect the Camera's USB to a computer.
    See...
  3. Thread: Tracking

    by Patriot_Ben
    Replies
    1
    Views
    399

    Hello, We have added this functionality now......

    Hello,

    We have added this functionality now... it should be on the email confirmation receipt.
  4. 4 slots at 4GB max, means each slot can support a...

    4 slots at 4GB max, means each slot can support a dual-ranked 1GB module.
  5. Hello, Welcome to the forums! Check...

    Hello,

    Welcome to the forums!

    Check Gateway's website to ensure that you have the card reader drivers installed. Do you have another device you can verify if the card is working as well?
  6. Hello, To further narrow down the issue, can...

    Hello,

    To further narrow down the issue, can you try testing the memory at default memtest? Please test each stick.
    Memtest can be found here: http://www.memtest.org/
    Please let me know if you...
  7. Sorry for the confusion. I'll get this reworded...

    Sorry for the confusion. I'll get this reworded later. Basically no, the Wiper utility or Torqx 2 Trim Utility will not pass through a raid drive.
    Your best bet would be to let the drive idle for...
  8. Replies
    19
    Views
    4,925

    Hello, There's no internal difference between...

    Hello,

    There's no internal difference between "R" or non "R." R stands for Retail Version.

    At this point, it does appear to be a defective drive.
  9. Replies
    19
    Views
    4,925

    Hello, Can you try the following? Shred...

    Hello,

    Can you try the following?

    Shred
    http://askubuntu.com/questions/17640/how-can-i-securely-erase-a-hard-drive

    Clean all (Windows 7)...
  10. Replies
    2
    Views
    300

    Hello, For the Low Level Format, did you use...

    Hello,

    For the Low Level Format, did you use the full restore option?
  11. Replies
    2
    Views
    363

    Hello, No, the Gauntlet Node is not affected...

    Hello,

    No, the Gauntlet Node is not affected by this. It does not use OpenSSL protocol.
  12. Replies
    9
    Views
    651

    Sorry for the late reply. For troubleshooting...

    Sorry for the late reply. For troubleshooting purposes, can you see if a different drive works?

    We haven't tested this drive, but it appears that this drive looks like it's having issues with the...
  13. Replies
    9
    Views
    651

    Hello, Make sure that Node has the latest...

    Hello,

    Make sure that Node has the latest 1.2.4.6 firmware http://www.patriotmemory.com/software/V_21_1.2.4.6.zip ?

    Also, make sure that the Seagate drive has the latest firmware from the...
  14. Hello, Can you see if a low level format will...

    Hello,

    Can you see if a low level format will help?

    http://www.patriotmemory.com/software/Patriot%20Supersonic%20Magnum%20LLF%20Tool.zip
  15. Hello, Some good diagnostic software are:...

    Hello,

    Some good diagnostic software are:
    HDtune:
    http://www.hdtune.com/download.html

    and

    Crystal Disk Info:
    http://download.cnet.com/CrystalDiskInfo/3000-2086_4-10832082.html
  16. Hello, This is actually correct. The entire...

    Hello,

    This is actually correct. The entire kit is 6GB total. Each module is 2GB. Hence the 3x2GB, 6GB Kit. Sorry for any confusion.
  17. Hello, Yes, the memory is compatible with the...

    Hello,

    Yes, the memory is compatible with the system.
  18. The X58 motherboard was much easier on memory. ...

    The X58 motherboard was much easier on memory.

    Therefore the Sector 7 (designed for Intel X58) may not correlate.

    You may need to relax the timings and frequencies to something like 1866...
  19. It sounds like they have different programming. ...

    It sounds like they have different programming.

    Can you try manually setting up the timings?

    Run them all at 1600 10-10-10-27.

    Did the modules that run at 6-6-6-20 run at 1333?
  20. I'll be glad to assist you. Yes, the memory...

    I'll be glad to assist you. Yes, the memory should generally work. However, since the memory is tested on Intel Platforms, the rated performance speeds may not work. You may need to relax it to...
  21. To further troubleshoot the memory, can you try...

    To further troubleshoot the memory, can you try testing the memory at default with memtest?

    Memtest can be found here: http://www.memtest.org/

    3-4 Loops should be fine. Please test it each...
  22. Try increasing tRFC to 300, make sure that the...

    Try increasing tRFC to 300, make sure that the DRAM voltage is also set.
  23. Hello, Can you disable XMP and manually set...

    Hello,

    Can you disable XMP and manually set the values?

    Use what the label indicates.
  24. Hello, Can you make sure you have the latest...

    Hello,

    Can you make sure you have the latest BIOS?

    Basically, SPD programmed values for latencies are programmed to nanoseconds to = X latency. It's possible that the BIOS is rounding this...
  25. It doesn't sound like a memory-related issue tbh....

    It doesn't sound like a memory-related issue tbh. Have you tried a full memtest on the memory just to be certain? Try running it for 4-5 full loops.
    Memtest can be found here:...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4