Search:

Format settings, CABAC : Yes
Format settings, ReFrames : 7 frames

The above settings are just asking for trouble.
either disable CABAC or reduce the reframes.

Just a side note, don't you need to use "mediatomb-static-0.11.0-r2-linux-uclibc-mips32el.tar.gz " instead ?

Do you have screen saver function enabled ?

I meant to say you can create a symlink with whatever name under /usr/local/etc.
This symlink will point to the appropriate location (which varies by box).
For creating the jukebox or whatever...

I would say its the 6 pin (I have seen this is earlier RT boxes)

1 - VCC
2 - TX1
3 - RX1
4 - TX0
5 - RX0
6 - GND

Just one set should do.

Wouldn't it be easier to just relink under the same name in /usr/local/etc ?

You need to hold the escape key to interrupt the setup, if you can't interrupt the startup sequence then double check your wiring (namely TX)

If you have a direct link, why not just execute a "wget" from telnet ?

Sorry I had to remove your personal email from the post above.

Now for your issue, I would revert back to P02 then back to the original firmware you had before the update.

If that didn't fix it...

Logitech harmony basic models starts from $20 refurbished, $30 brand new.

what is supposed to be passed to your DAC via USB ?!?

no memory effect, will always start booting up.

Net User ID: you windows account login name.
password: leave empty because your account above has no pass.
IP: the IP of you windows machine (check either on your windows machine or on the router)...

Check the unbrick for $5 link in my sig below.
Best of luck,

ok, thats the latest firmware, going up to one resolution setting but not the other seems like classical HDMI cable case. I would try replacing that and/or the HDMI port you used on the TV.
I would...

They are usually very prompt about RMA service (be it a fan or the whole unit).
I would try calling, might have misplaced the email or something.
The well should be under the sticker, there is...

mmmm ... I can't spot a parameter that might cause the problem, but because there is difference I would suspect another unreported parameter.
Lets try fixing the MKV and see if that would fix the...

Which bootcode version do you have ?

Why are using UPnP ? why not just use straight forward share access and get UPnP transcoding out of the loop ?

Should work.

You need either learning or programmable remote.
Universal remote (device code based) wont work.

How regular do expect updates for a device release August 2009 ?!?

which firmware are you running ?

Pass the files through "mediainfo" and see the different encoding setting between the two files.

Actually it does and it works quite well :)
You need to:
- disconnect HDMI and any other devices connected to PBO (including external drives).
- use only the back dataport to connect the PBO to...