Search:

Thanks every one for the post. We have been working with our vendor for the next firmware update, so apologize for any late response. All in all, we are doing the best we can to help expedite the...

some of the funtions have been taken off due to licensing issues. But we are in the process of getting them activated via firmware. For instance, "eject" button is actually used for USB Optical...

1) select both drives
2) select RAID type, JBOD if using single drive only
3) select FAT or EXT2 (recommended)
4) format

Depends on drive size, it may take about 30-40 mins to finish the whole...

at the moment i'd recommend using EXT 2 only, we will release another firmware after the next one with EXT3 support. It's still in the works now.

did you specifiy the folder where media files are contained?

try reflash again.. see if it helps...

sorry running a bunch of project at the same time.. and we are bring on more resource to monitor forums.

we are running a little behind on the wireless N adapter. The original qualified chip.. had...

the P04 firmware was update during the weekend. I posted in the link to download per many people's request. The firmware update detail will follow later today. As I have stated.. we will have two...

have you check the backup option to adjust your stored location?

i'll check on the public folder rights.. seems rather strange.

in a week or 2.. waiting for the final rev.

i wouldn't recommend you decompress with the file with in NAS.... you literally reading the file locally on your system and unpack them and then back to the NAS.

once you map the drive, there...

can you get us a screen shot?

that's more of a windows option... you can check your viewing option under windows.

and yes for deleting...

should be end of March..

current on the list:

Tel net
Language pack
and a few minor adjustments

is your printer getting an IP?

you can find this under printer -> ports

what printer do you have?

win 7 / vista has some weird issue with driver for network printers. You kinda have to...

what drives are you using?

i would suggest you start the unit with out drive at all..

first boot, you wil see the lights blinking.. once completely boot, both drive LEDs will blinking red.
...

lol.. who said any thing about 03?

04 should be up this weekend.


and we are working on 2 more udpate this month as well. :)

we re-did the 1.3 firmware, which will be posted later today (hopefully) :).

i would suggest reflash the firmware and see if it has these fixed.

We've been getting a bit inquiry of using GearBox with our Box Office media player. Some had issues with reading files.. here's a quick write up to go over your setup.

1) Assuming a user "ABC" has...

we should have a updated version for 1.27. should be posting on our site tomorrow. Try update it again.

have you try to create a seperate folder than public?

yes that is correct way to shut down.

can you restart the system via UI and see if RAID is intact?

since the pritner is sharing an IP with your valkyrie, you need to check the manual how to set up the printer. Simply installing pritner will not work.

make sure the HDD is pushed all the way down.

good feedback.. we did roll two updates into the next one since changes were too minor.

I'll pass the word down.. small updates better than no updates :).