PDA

View Full Version : Data & Data.Local


izotope
11-23-2010, 07:31 AM
Hi All

I have 3 TB in Raid 0 and i thought it was strange my data filled up very quick.

Ive just realised it seems to duplicate in \\Admin\Data.Local as well as a folder in \\Data

How can i stop this?

I only use it for UPnP to stream movies/tv shows

Thanks in advance
ierdna
12-21-2010, 07:04 PM
im curious about this too...
the *.local shows up under ftp also. odd
izotope
01-10-2011, 05:50 AM
no answer? this is kinda stupid my 3tb nas turns into a 1.5tb nas cos everything is duplicating...
Patriot_Ben
01-10-2011, 09:39 PM
Hi izotope,

Can you please identify the following...?

1. Valkyrie firmware you are on?
2. Harddrive Make and Model?
3. If possible, please provide a screen shot of disk management in browser ui of the settings.
izotope
01-13-2011, 08:14 AM
Ben,

I am on V01R01 i tried R02 R03 R04 but it freezes everytime it tries to update.

Unsure of HDD without opening, they were just two 1.5tb WD's though when i got them.

I have attached a picture as well asa folder view so u can see the problem

http://img816.imageshack.us/i/diskmanagement.jpg/
http://img138.imageshack.us/i/theproblem.jpg/

Look forward to your response
BadIntentions
01-13-2011, 05:40 PM
Ben,

I am on V01R01 i tried R02 R03 R04 but it freezes everytime it tries to update.

Unsure of HDD without opening, they were just two 1.5tb WD's though when i got them.

I have attached a picture as well asa folder view so u can see the problem

http://img816.imageshack.us/i/diskmanagement.jpg/
http://img138.imageshack.us/i/theproblem.jpg/

Look forward to your response

Just a random guess, but are you using windows 7 or vista? If so, have you set the folder share to map to a drive automatically when you boot?

I have seen this behavior before, but I usually have reformatted or rebuilt the valkyrie (i do lots of 'hacking' on it) by the time i notice it.
izotope
01-17-2011, 05:27 AM
i had, but i had unmapped it and it still duplicates.. if i delete from .local or normal dump folder it is the same.
Patriot_Ben
01-17-2011, 07:55 PM
Hi izotope,

This should not be happening in a Raid 0 array. What we would recommend doing is exchanging the unit under warranty. Please check your PM for further RMA instructions.