PDA

View Full Version : New Firmware 1.3



Claudeb
03-02-2010, 02:34 PM
Just seen a firmware update on the patriot site...

we going backwards from 1.27 to 1.3?? lol

http://www.patriotmem.com/software/GearBox/GearBox_FW_1.3.zip


Just flashed it and will let you guys now how stable it is. :):D

Claudeb
03-02-2010, 02:39 PM
Firmware Version R3282-1.56b LOADER32 1.20e W1.30-FAT32

sandy4711
03-02-2010, 04:25 PM
please - tell me where you found Firmware Version R3282-1.56b LOADER32 1.20e W1.30-FAT32 - THE ORIGINAL !!

thanxs from Germany

Claudeb
03-02-2010, 05:23 PM
please - tell me where you found Firmware Version R3282-1.56b LOADER32 1.20e W1.30-FAT32 - THE ORIGINAL !!

thanxs from Germany

posted on patriot's site.

http://www.patriotmem.com/products/detailp.jsp?prodline=6&catid=44&prodgroupid=160&id=900&type=21

sandy4711
03-02-2010, 06:07 PM
..... please excuse my stupid question - its because i have a similar nas server - not a "gear box"
i have a 7links nas server, seems to be a mrt-wanser-r.

and the gear-box seems to be very similar and perhaps uses the same firmware.

and the firmware here is the newest in the whole internet

so i think over to burn this gear-box firmware into my 7Links.

if you have further information for me my thanks will hunt you forever ;-))

greetings from the kingdom of Bavaria/Germany

Claudeb
03-02-2010, 06:40 PM
..... please excuse my stupid question - its because i have a similar nas server - not a "gear box"
i have a 7links nas server, seems to be a mrt-wanser-r.

and the gear-box seems to be very similar and perhaps uses the same firmware.

and the firmware here is the newest in the whole internet

so i think over to burn this gear-box firmware into my 7Links.

if you have further information for me my thanks will hunt you forever ;-))

greetings from the kingdom of Bavaria/Germany


If it's a wanser then you should be able to flash it no problem.