Chanimal
10-21-2006, 02:55 PM
I have 2GB of 3500 with advertised timings of 2-3-2-5-1
However, I updated my Award Bios on my Gigabyte board and I have a LOT of new settings--of which none are listed here.
My board system:
Gigabyte GA-K8NSC-939
AMD 4200 X2
ATI AIW 800XT
Memory: 2 1 GIG sticks (PDC2G3500LLK) PC 3500
Windows XP (2)
My previous auto settings detected the proper settings. My new auto does not, so I had to setup the manual settings, but I don't know the rest of the settings. Since the initial settings were wrong, I assume the subsequent settings are also wrong.
Following is what I have (the asterix matches the standard 4 settings, the others are from the automatic setting and haven't been changed):
CAS - 2*
TRAS - 5*
TRCD - 3*
TRP - 2*
TRRD - 2*
TRC - 12
TRFC - 15
TRWT - 3
TRW - 3
TWTR - 2
TREF - 100 mhz, 3.9
Peamble - 5.5 ns
Async - 7ns
What are the correct settings and what should I change? (I want to get the speed I paid for, but stability is more important (video production, 3D machine).
However, I updated my Award Bios on my Gigabyte board and I have a LOT of new settings--of which none are listed here.
My board system:
Gigabyte GA-K8NSC-939
AMD 4200 X2
ATI AIW 800XT
Memory: 2 1 GIG sticks (PDC2G3500LLK) PC 3500
Windows XP (2)
My previous auto settings detected the proper settings. My new auto does not, so I had to setup the manual settings, but I don't know the rest of the settings. Since the initial settings were wrong, I assume the subsequent settings are also wrong.
Following is what I have (the asterix matches the standard 4 settings, the others are from the automatic setting and haven't been changed):
CAS - 2*
TRAS - 5*
TRCD - 3*
TRP - 2*
TRRD - 2*
TRC - 12
TRFC - 15
TRWT - 3
TRW - 3
TWTR - 2
TREF - 100 mhz, 3.9
Peamble - 5.5 ns
Async - 7ns
What are the correct settings and what should I change? (I want to get the speed I paid for, but stability is more important (video production, 3D machine).